4 Litre River Art Resin High Performance 3:1 Epoxy Resin Ultra-Clear VOC Free
 
Unleash the Maker in you, Pour – Layer – Spray – Brush to create whatever you need this be.
Mixes well with MICA powders, Inks and dyes. There are endless amounts of ideas you can create – invent – make anything you want.
Mix 3:1 by Weight Ratio
4 Litre size (3Ltr part A and 1Ltr part B)
Quality Guaranteed 100%
Why choose River Art Resin Epoxy?
Non-Toxic                          Non-Flammable                              VOC Free
Crystal Clear Finish: Cures Crystal Clear. Suitable for wooden bar tops, River Tables, Jewellery, & more.
UV Resistant: Added UV Inhibitors resist yellowing when exposed to the Sun and Ultra Violet light
Self-Level Mixture: Our epoxy will self-level over leaving a consistent thickness
Bubble-Free: Epoxies may bubble, easily releases all bubbles due to low viscosity, can be used with a heat gun to increase release speed.
Impact Resistant: Cures super strong, leaving a smooth impact-resistant surface
Minimal odour and NOT AT ALL yellowing after a long period of time.
River Art Resin Epoxy will leave your projects with a Solid, UV resistant, impact resistant high gloss finish. Don’t ruin a one-of-a-kind project with a cheap epoxy.
 
This Ultra/Crystal Clear Epoxy Resin is a ‘top of the line’ water clear superior performance epoxy system that can be used for so many applications including —Casting, Jewellery, Surfboards, Bench Tops, Boat repairs, Floor and Bench Top coating
Following factors affect the curing time:
Mixing quantity (the more you mix, the fast it cures and vice versa)
Room Temperature (higher room temperature will speed up the curing)
Mixing ratio: 3:1 (2 Parts A and 1 Part B)
Application temperature: 25°C
Processing Time: 1 – 2hrs
Gel Time: 6 - 8 hrs
Curing Time: 24 - 48 hrs (Data based on 100ml mixing @ 25°C)
Viscosity:           2500-3500 CPS for Part A 
8-15 CPS for Part B 
Clarity:                 Pt-Co value < 10 for both Part A and Part B (Crystal Clear)
Compatibility: Binding to metal, inorganic materials including cement; stone, natural materials including wood; particleboard, most plastics except polyethene, polypropylene, EPDM.
Available order quantity: 5 Litre 
Shelf life: 12-18 months
Instructions:
1. Ensure that all tools and containers are clean and dry
2. Mix Part A and B and stir thoroughly until well combined
3. If using dyes or powders, please mix well to make sure 
all is mixed by scraping the container walls allowing the resin to combine.
4. The epoxy will react and produce heat. The larger amount 
mixed, the more heat will be generated and the curing time  will be shortened.
5. Always use safety equipment while handling resin, gloves 
face masks and safety glasses.
Product Parameters
Exterior................Transparent viscous body
Viscosity.......................................2500-3500CPS
Processing Time ....................25°C1 -2 hours
Gel Time....................................25°C 6 - 8 hours
Cure Time.................................25°C 24-48 hours
Shelf life............................................18 months
Hardness......................................Shore D > 85
 
River Art Resin – Quick Guide
Please follow these instructions carefully.
Always use safety equipment
 
Recommended materials – Epoxy Resin – Gloves – Weight scales – Mixing Cups & Stirrers – Infrared temperature gun – Heat Gun or Blow torch – Painters Tape – Cleaning Cloth
Tape or seal your mould or project to avoid leaking and spilling the resin
Prepare the weight scales and set it GRAMS. Do not measure by ml as this is volume.
Always Pour Part B – the hardener first. Measure the correct ratio of your resin (1:1 -2:1 or 3:1). Then add Part A.
For Example
1:1 Ratio – Part A 100g = Part B 100g
2:1 Ratio – Part A 200g = Part B 100g
3:1 Ratio – Part A 300g = Part B 100g
Mix Part A and Part B with a stirrer gently. Make sure you scrape the sides and mixing the resin well. Mix for 5-7mins, confirm no swirls are visible, if you light swirls, this means the hardener has not mixed evenly. Mix the resin for another few minutes or until all swirls disappear. Let the resin rest for 5-8mins, this will allow the bubbles to rise and for the exothermic reaction to start. This means if the room temperature is above 25°C, the resin will start to heat up.
Use the Infrared Temperature gun to check the resin is heating up. This is a very important point. When the temperature of the resin has increased to 35-40°C, this would be a good time to separate the mix if needed and mix you Mica or Dyes to Colour the resin.
If the room temperature is below 25°C, the resin will need help to start the exothermic reaction. You can use a heat bed or oven with temperature not exceeding 60°C.
Please Note:
The curing time depends on the room temperature.
At 25°C, the resin will take around 8-12 hours.
During winter, the temp ranges from 1-20°C. This will slow the curing time to 24-48 Hours.
During Summer, the temp ranges 20-35°C. This will hasten the curing time to 6-8 Hours.